Wiki – Steelcad Drafting

RW-240 Large Printer – Scanning

Staff Helper — Thu, 23 Jul 2020 04:30:04 +0000

Access to this post is restricted, please go to the website to read it.

RW-240 Large Printer – Printing

Staff Helper — Thu, 23 Jul 2020 04:23:39 +0000

Access to this post is restricted, please go to the website to read it.

Printing & Scanning

Staff Helper — Thu, 23 Jul 2020 04:16:58 +0000

Access to this post is restricted, please go to the website to read it.

Tekla Purlin Bundling

Staff Helper — Thu, 23 Jul 2020 04:12:57 +0000

Bundling is a Steelcad Feature. The aim being to assign numbers for manufacture and delivery to site of cold formed steel like: Purlins, Girts, Bridging and accessories.

Tekla NC & DXF Manual Creation

Staff Helper — Thu, 23 Jul 2020 04:08:41 +0000

To be able to create NC & DXF data you first select your parts in the model. (Note that the part will need to be numbered for nc creation) The next step is to run Step 4 from the User menu in Tekla.

Tekla Lotting

Staff Helper — Thu, 23 Jul 2020 04:04:32 +0000

Access to this post is restricted, please go to the website to read it.

Section J Roofing Systems

Staff Helper — Thu, 23 Jul 2020 03:56:22 +0000

Modelling with the Section J roofing systems, including Metroll SafeBridge system and AshGrid (Roof spacer system).

Modelling holes in Tekla

Staff Helper — Thu, 23 Jul 2020 03:49:41 +0000

Access to this post is restricted, please go to the website to read it.

Modelling

Staff Helper — Thu, 23 Jul 2020 03:47:16 +0000

Access to this post is restricted, please go to the website to read it.

Macros / Components

Staff Helper — Thu, 23 Jul 2020 03:41:00 +0000

Access to this post is restricted, please go to the website to read it.